Problem with navaids points in the flight plan

[Bulva]

(sorry for my English)
I have a problem with creating a flight plan in 124thATC. Problem with navaids points in the flight plan.
I create it first in GSM530 (for example: EPWA KRN LOZ EPLL) and everything is OK.
Then I import this plan into the planner in 124thATC or manually enter KRN LOZ into the flight plan bar.
And then after the approval of the plan a problem arises.
The program as KRN (Karnica) point (which is normally near EPWA airport) is set by another KRN (from distant Ukraine - Kirensk).
The same applies to, for example, the LIN point (Linin) (which is also close to the EPWA airport), and the program loads a very distant LIN point (Linate Milan) into the plan.
What to do to make 124thATC differentiate between different points with the same names (LIN, KRN, ...., etc). ?????

greetings

[ntnll]

(sorry for my English)
I have a problem with creating a flight plan in 124thATC. Problem with navaids points in the flight plan.
I create it first in GSM530 (for example: EPWA KRN LOZ EPLL) and everything is OK.
Then I import this plan into the planner in 124thATC or manually enter KRN LOZ into the flight plan bar.
And then after the approval of the plan a problem arises.
The program as KRN (Karnica) point (which is normally near EPWA airport) is set by another KRN (from distant Ukraine - Kirensk).
The same applies to, for example, the LIN point (Linin) (which is also close to the EPWA airport), and the program loads a very distant LIN point (Linate Milan) into the plan.
What to do to make 124thATC differentiate between different points with the same names (LIN, KRN, ...., etc). ?????

greetings

Hi Bulva welcome in the forum,
let's start here Read BEFORE Post !!!

[Bulva]

Welcome once again.
I hope that this error file was about.

bugReport.7z

Best wishes

[Bulva]

Any ideas ???

[RandomUser]

Patience. Antonello does have a life outside 124th & X-Plane.

[Bulva]

Sorry,

[ntnll]

Patience. Antonello does have a life outside 124th & X-Plane.

so true, as said this is a free project and the resources limited. I spend hours of my precious life for this!

Sorry,

At a first glance, looking bug report .kml files with google earth, I see the issue on KRN. This issue should be addressed in the last .60 RC preview, feel free to test it and see if the problem is solved (remember this versions are still under development and unstable)

a.

[Bulva]

Thank you for your response.
I installed the latest version, but the problem is still there.
After entering the KRN (or LIN) into flight plan, KRN (from Ukraine) and LIN (from Italy) points appear.
I have a request, could anyone check it (set on EPWA and enter the KRN or LIN into flight plan), because maybe I am doing something wrong.

The fragment of the file FlightPlan.kml :
....
<Placemark><name>WAR</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>20.6572,52.2593</coordinates></Point></Placemark>
<Placemark><name>KRN</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>108.067,57.7719</coordinates></Point></Placemark>
<Placemark><name>LOZ</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>19.6248,51.7761</coordinates></Point></Placemark>
....

[ntnll]

maybe I am doing something wrong.

I'm more prone to believe that's a bug of the plugin, not sure because you're not providing the log for the last flight you made with the .60 version. I need to test the flight, I'll try later when I'll back home.
The bug is basically caused to a well know XP SDK limitation.

[ntnll]

maybe I am doing something wrong.

I'm more prone to believe that's a bug of the plugin, not sure because you're not providing the log for the last flight you made with the .60 version. I need to test the flight, I'll try later when I'll back home.
The bug is basically caused to a well know XP SDK limitation.

[Bulva]

bugReport.7z

[ntnll]

bugReport.7z

I need to correct myself, this doesn't look a plugin bug. In fact I can't validate LOZ as a valid VOR/NDB in the zone you're flying. Where did you got this flight plan, where LOZ came from?

[Bulva]

Thank you very much for trying to help.
I enter the plan manually (or use Little Navmap).
LOZ is a Navaid type: VORDME (Wiaczyn Dolny fr .: 116.10)(near EPLL) and the 124thATC program has no problems with it. I can also remove it from the flight plan and it does not change anything.
The problems are KRN and LIN points, which are correctly located in GNS530, and 124thATC interprets them as other distant points.

[Bulva]

Maybe I'm installing 124thATC wrong.
What should I put in the navdata subdirectory ???
I tried different settings but no effect.

[ntnll]

Maybe I'm installing 124thATC wrong.
What should I put in the navdata subdirectory ???
I tried different settings but no effect.

the problem is not your installation, is your flight plan.

rfinder for example suggests a completely different one:

EPWA SOXER EPLL